Bowl Feeding Machine Controller SDVC31-U 10A

Enhance your material handling operations with the Bowl Feeding Machine Controller SDVC31-U 10A, designed to ensure precise, efficient, and reliable material feeding. This advanced controller boasts a range of features that optimize your feeding process.

Tư vấn bán hàng 24/7: +84347103200 alo chat 0347103200

Sản phẩm đã mua của quý khách gặp trục trặc? Liên hệ hotline chăm sóc khách hàng0347103200 hoặc Đăng ký bảo hành

Đặt hàng ngay

Category: Vibratory Feeder Controller

Features

Frequency adjustment and high-precision automatic voltage stabilization
Adjustable slow start
Full/empty stop using switch sensor
Full/empty shutdown with photoelectric sensor
Remote speed control
DC control output
Keypad lockout

Basic Function

Frequency Adjustment: Users can adjust the controller’s output frequency to find the best frequency for a smoother, quieter, and energy-saving feeding effect.
High-precision Automatic Voltage Stabilization: The built-in digital voltage stabilization circuit eliminates feeding speed changes caused by power supply fluctuations.
Adjustable Slow Start: When starting, the output voltage gradually increases from zero to the preset voltage, reducing impact on the vibration plate. Users can preset the slow start time digitally.
Switch Sensor Full/Empty Stop: Supports NPN type sensor or PLC remote full/empty stop control.
Photoelectric Sensor Full/Empty Stop: Supports photoelectric counter sensor full/empty stop control.
Remote Speed Control: Users can remotely control the output voltage using an external potentiometer, PLC, or 1-5V voltage signal.
DC Control Output: The controller can output a DC low voltage control signal to drive devices like solenoid valves.
Keypad Lock: Long press the on/off key to lock all keys and prevent misoperation.
Maximum Output Voltage Setting: Users can set the maximum adjustable voltage to prevent accidental over-voltage that could damage vibration equipment.
Over-voltage Protection: The power supply shuts down automatically when input voltage is too high to protect itself.
Digital Overheat Protection: The controller stops output when working temperature is too high to protect itself.
Over-current Protection: The system stops output when the working current exceeds the rated current to protect the controller and vibration equipment.
Recoverable Short Circuit Protection: The system stops output during a short circuit to protect the controller and vibration equipment. After clearing the short circuit, the system can be re-energized to work normally again.

Technical Specification

Item	Range			Unit	Description
Item	Minimum	Typical	Maximum	Unit	Description
Input voltage	85	220	260	V	AC effective value
Output voltage adjustment range	0		260	V	Less than 150% of input voltage
Voltage adjustment accuracy	1			V
Voltage regulation accuracy	0		10		Vout/Vin
Voltage regulation response time	0.0025		0.025	s	One-tenth of the output voltage cycle
Output current adjustment range	0		10	A
Output current adjustment range	0		10	A
Output frequency	40		400	Hz
Frequency adjustment accuracy	0.1			Hz
Output waveform	sine
Slow start time	0		10	s	Factory default 0.5
Delay time range	0		20	s	Factory default 0.2
Delay time accuracy	0.1			s
Overheat protection temperature	60	65	65	℃
DC control output voltage	22	24	26	V
DC control output current	0		200	mA
Analog control model	1 – 5			V	Remote speed control voltage
Digital control signal	24			V	Switch signal control
Adjustment method	6			key
No-load power consumption		3		W
Display mode	5			digit	LED digital tube
Wage environment temperature	0	25	40	℃	No condensation
Wage environment humidity	10	60	85	%	No condensation